thread: Warm milk and sippy cups?

  1. #1
    Registered User

    Aug 2006
    1,074

    Warm milk and sippy cups?

    I'd like to start getting DS drinking milk from a sippy cup rather than from a bottle but I have read that you can't use warm milk in sippy cups as they aren't designed for it. He doesn't like cold milk so does anyone have any ideas? What do you do? Thanks

  2. #2
    BellyBelly Life Subscriber

    Feb 2006
    melbourne
    11,462

    i think its ok as long as you dont heat up the milk in the sippy cup, id use something like a glass jug!

  3. #3
    Registered User

    Jan 2006
    The Hawkesbury
    4,505

    Um.. it would probably depend how warm/hot you make the milk. I nuke DS's milk in his sippy cup for 20 seconds to take the chill off the milk. But his sippy cups are hard plastic. Im sure it would be fine, being youre not going to nuke it to boiling point?

  4. #4
    Life Subscriber

    Jul 2006
    Brisbane
    6,683

    I would think that the reason they say that is due to the risk of burns to the mouth. How warm does he like his milk? If you were to just sit it in a jug of warm water for a few minutes I would think it would be fine. I wouldn't be putting microwaved liquid in though, as that heats unevenly and you risk him burning himself, even if you don't warm it for long. The other alternatives are a straw cup, or a normal cup, but in both cases you still risk burns from hot liquid.

  5. #5
    Registered User

    Oct 2006
    Sydney
    4,081

    Hmmm, that's interesting... We use tupperware ones and they cope really well with warm milk (Natty has always drunk her milk from a cup - we went from boob to cup). Though she doesn't have it hot, only with the chill taken off like Kell said. I can't think of a type of cup that wouldn't cope with milk at a drink-able temperature?

  6. #6
    Lovenhope Guest

    I warm DS's milk in a ceramic mug for 40 secs. Then transfer into a take'n'toss type sippy cup. The pouring distributes the heat evenly. The reason for using the mug is that the bottom of the cup says 'not suitable for microwaves'.

  7. #7
    BellyBelly Life Subscriber

    Feb 2006
    melbourne
    11,462

    i was meaning the fact that some plastic isnt ment to be heated up, mainly the cheaper plastics, the tupperwear ones would be fine!!

  8. #8
    Registered User

    Aug 2006
    1,074

    Thanks, that's my main concern too with the plastic not meant to be heated up due to cancer risks etc etc. What are the tupperware ones like? I'm not heating it up alot, just warmish so that it is nicer to drink.

  9. #9
    Registered User
    Add krysalyss on Facebook

    Feb 2007
    on the move.....
    2,745

    I just bought a magmag bottle that has interchanging lids to a sippy cup then a straw. It is a #5 plastic bottle (a 'good' plastic if you are worried about BPA) and it suitable for warm liquids.
    HTH

  10. #10
    Registered User

    Nov 2006
    Somewhere Over The Rainbow
    3,094

    Sweetpea, just make sure you stay away from any cups that are made from "numbers" 3,6, and 7. These so far are considered to be "unsafe".

    Unfortunately tupperware will not disclose to you as to which numbers they make their products from, so personally i would stay away.

    from thegreenguide.com:

    Plastics to Avoid
    #3 PVC
    #3 polyvinyl chloride (PVC) is often used frequently in cling wraps for meat. However, PVC contains softeners called phthalates that interfere with hormonal development, and its manufacture and incineration release dioxin, a potent carcinogen and hormone disruptor. Vinyl chloride, the primary building block of PVC, is a known human carcinogen that also poses a threat to workers during manufacture.
    #6 PS
    Extruded polystyrene (#6 PS; commonly known as Styrofoam) is used in take-out containers and cups, and non-extruded PS is used in clear disposable takeout containers, disposable plastic cutlery and cups. Both forms of PS can leach styrene into food; styrene is considered a possible human carcinogen by the International Agency for Research on Cancer. It may also disrupt hormones or affect reproduction.
    #7 PC
    #7 Polycarbonate (PC) is found in baby bottles, 5-gallon water bottles, water-cooler bottles and the epoxy linings of tin food cans. PC is composed of a hormone-disrupting chemical called bisphenol A, which has been linked to a wide variety of problems such as cancer and obesity.

  11. #11
    Registered User

    Feb 2006
    Newcastle, NSW
    4,219

    I heat Harrison's milk up on the stove and then put it into his sippy cup. He only has it warm enough to take the chill off it, especially on cold days where the last thing I want is a cold drink.

  12. #12
    Registered User

    Aug 2004
    Sth East Melbourne
    1,324

    Hi there!

    Tupperware demonstrator here and I dont have the answer for you now but i will do my best to find out for you the 'number' of the plastics used in tupperware.
    I have asked many questions about the plastic for my own sake and I do know that all tupperware is made from Water based plastics and water based silicon and all of the colouring is food dye!

    I will put my feelers out and see what else i can find out for you!

Similar Threads

  1. Help! - refusing all milk @ 16 months
    By *Belle* in forum Baby & Toddler General Discussion
    : 6
    : January 29th, 2008, 07:04 AM