thread: Painting - what do i need to know?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User

    Nov 2005
    in a house!
    6,125

    I actually don't think I did!!! Its really hard when you don't know. I remember learning a few months ago and its harder than I thought

  2. #2
    Registered User

    Jul 2004
    5,756

    You've both explained it great!

    Now just gotta get DD to pick a colour. Hopfully one that looks nice lol.

  3. #3
    Registered User

    Nov 2005
    in a house!
    6,125

    If you choose a colour which is much lighter or much darker than the existing colour, you will most probably need 2 coats

    Also, with the cutting in, you do one coat all the way around, and you must wait until it dries before you do the second coat.

    MOst of the time rollers will distribute much more paint than the brushes, so it is possibly you may need 3 coats of cutting in and 2 coats of roller

  4. #4
    Registered User

    Jan 2008
    in my head
    1,975

    You can actually buy a cutting in tool. It is a square plastic thing with a handle on the back and roller type material on the front. You just run this along the edges of the walls as explained above to 'cut in'. This might mean that you don't have to worry about taping the cornices and skirts. You should be able to buy one where ever you get your paint and I don't think they're all that expensive. No more so than a good cutting in brush would be (need to have long bristles and be of good quality).

    Good luck!! Once you get started it won't be that hard. I painted a room a few years ago and it came out alright even though I'd never done it before.

  5. #5
    Lucy in the sky with diamonds.

    Jan 2005
    Funky Town, Vic
    7,070

    Now you be careful with your mega-nesting hun!

    If the walls are ok a scrub with sugar soap (gloves on) will be fine.

    You will need a brush to cut in - there are ones designed for it.

    I hate rollers, they flick paint everywhere and it can be hard work maintaining the right pressure. When you go to Bunnings for your supplies check out the uummm whatsit called - umm pad painters I think they are called. It looks a bit like a mop head and its HEAPS better to apply paint with rather than a roller.

  6. #6
    Registered User

    Mar 2006
    soon to be somewhere exotic
    1,550

    ok I'm actually starting this tonight

    Wash down walls with sugar soap (I'm using sugar soap solution with a roller as I have rendered brick walls and a spongue will just break up) - sugar soap will get rid of any grime/grease etc
    Fix any holes etc with a spacfilla (I don't need to do this - walls not smooth)
    Sand over where you've fixed holes
    Start painting

    You have two choices when it comes to painting
    1. cut in the corners/edges first & then paint (with either roller or brush); or
    2. paint main parts of wall first and then cut in the corners/edges

    I have a paintbrush with a diagonal edge to it for cutting in

    Make sure when painting (with brush or roller) that you do not overload the tool as you can get drips.

    When picking colours - get pieces of plasterboard and paint the tester colours on there (at least 50cm x 50cm blocks) - sit those against the walls and look at the colours in all lights (daylight and at night under bulbs etc) - that will give you a good indication of the colour in the room (saves painting it on the wall and hating the colour & deciding for something lighter and then having problems painting over the paint swatch)

  7. #7
    Registered User

    Oct 2007
    Middle Victoria
    8,924

    When you buy the paint, buy a couple of plastic drop sheets. They only cost a couple dollars each and will stop paint drops on the carpet. We used tinned tomatoes to hold them down.

    If you use powder in your washing machine, the boxes usually come with little plastic scoops. We save these, and you can use them to take the paint from the tin into the paint roller tray. Try to prevent drips on the edge of the tin, cos they make it messy when you are putting lid back on and moving tin later. If you hold brush under the plastic scoop while transferring from tin to tray, it will catch the drips.

  8. #8
    Registered User

    Mar 2006
    soon to be somewhere exotic
    1,550

    paint tin hints

    get a nail and puncture a few holes in the lip, this will help the paint drain back into the tin when you put the lid on (the lid will seal the holes)

    also I saw a spanky new toy in bunnings today - it is a lid for the paint tin that has a pourer.

  9. #9
    Registered User

    Jul 2004
    5,756

    Thankyou for all the tips!

    Hmm yes talk about nesting! If i pull this off well i'll also do DS's room as it is much bigger than DD's.

  10. #10
    Lucy in the sky with diamonds.

    Jan 2005
    Funky Town, Vic
    7,070

    *Lulu puts on her bossy boots

    Ok, so you nesting big time. This means you get lots of energy but you must be careful. Don't overdo it. No running up and down ladders, no carting around paint tins, no dragging furniture around no matter how good you feel.

    I nested like a demon with DS, I painted and decorated rooms, stripped and repainted a wardrobe and dresser AND steam cleaned the carpets myself, all in the last 4 weeks. I felt fantastic and it was this driving force pushing me to get everything done before he arrived. I ended up hurting my back and not even realising until the birth. I was in alot of pain, my back couldn't support me (AND he was posterior!), I actually threatened doing my own c-sect...
    Don't do any damage ok???

    sorry for ranting

  11. #11
    Registered User

    Nov 2005
    in a house!
    6,125

    Definitely no ladders missy!!!!! Get DH to do the top parts

  12. #12
    Registered User

    Jul 2004
    5,756

    Yeah i'll be careful. Be nice if DH would help me though but he hates painting and says it doesn't need it.